Our special holiday gift pack contains 2 red/green Magnetic Pairing Boxes in a smell-proof food-safe foil bag. The bag seals tight with a ziplock closure that keeps moisture out and odors in.
Magnetic Pairing Box
Reinforce the value of the target odor by rewarding your dog directly at the source of the odor!
Using the Magnetic Pairing Box (also called a Pairing Pod) you can put a treat right on the hide with the target odor. The dog can self-reward upon finding the hide so he gets his reward immediately. Then, while he's eating it, you can catch up with him and provide additional reinforcement. Pairing leverages classical conditioning and builds drive for odor.
A rare earth neodymium magnet with 6.6 lbs. of pull is encased in the plastic at the back of the vessel so that you can attach the Pairing Box to any ferromagnetic metal surface or object. Another magnet encased in the door allows the front door to slide easily into place and close securely (the cover cannot slide out of place). Because no adhesives are used to fasten the magnets inside the box, no unwanted odor is added to the vessel.
These sturdy scent vessels can be used outside or inside. Unlike metal tins and containers, these vessels won't rust.
Dimensions: 1 5/8"H (opener tab extends about 1/8" higher) x 1 1/16"W x 7/16"D. Tray is 1"W x 1/2"D. Fits up to 3 Q-tip heads.
Note: Click the "How to Care" tab for important information on how to use and care for your 3D printed nose work vessel.
Our nose work vessels are made of PLA (Polylactic Acid) filament which is a recyclable, natural thermoplastic polyester derived from renewable resources such as corn starch or sugar cane.
While PLA itself in its pure form is odorless, nontoxic, and considered food-safe, PLA filament is usually not because manufacturers use additives to make it tougher and print better, dyes for bright colors, etc. We researched to find materials that have certification documents showing they've been tested for toxicity and also that they are made with nontoxic dyes.
Here are some important tips for use and care of our nose work vessels:
- You can leave Q-tips in the vessel for short periods, but don't store them in the vessel for long periods. Essential oils react to ALL surfaces they come in contact with which can cause training problems because the reaction changes how the odor smells. Periodically change your Q-tips and clean the vessel.
- The vessels are NOT dishwasher-safe. They should be hand-washed in warm water (if your hands are not comfortable in the water, it's too hot!) using liquid dish soap. Towel dry or air dry.
- You can also clean out your vessels by wiping the inside with 70% isopropyl alcohol (rubbing alcohol) or using Zero Odor Spray.
- Temperatures above 110°F can warp products made from PLA so do not leave the vessels in direct sunlight or a hot vehicle for long periods of time.
