Pronounced "kehv' iht," which means "light" in Finnish, the Kevyt Pomppa is an all-purpose mid-season coat that will keep your dog dry and comfortable during unpredictable wet and chilly weather in the spring and fall. The waterproof and durable outer shell fabric protects the dog from rain, wind, and dirt. The lining is made of a soft synthetic fur, which insulates effectively. The anti-static materials ensure that even a long-haired dog doesn't get their coat tangled. The lightweight materials allow the jacket to pack up small, so it's easy to carry along with you in case the weather turns or you need to put a coat on your dog after a swim or romp in a damp field.
Designed by Pomppa Oy in Finland, this stylish and excellently made dog coat protects the dog's back, neck, abdomen, and rear end without restricting their natural movement. The front slits allow the dog to move his front legs without restriction. The large collar opening allows the dog to move his head freely. The snug-fitting belt holds the coat in place and the curved buckle conforms to the dog's back. The dog can also wag and carry their tail freely due to the tail slit at the back. Reflectors ensure your dog is seen in low-light conditions.
The Jumppa Pomppa can be worn underneath the Kevyt Pomppa if an additional warming layer is needed.
Features
- NEW: Harness opening
- NEW - only on Trail coat - Detachable & adjustable leg straps
- Perfect choice for wet and chilly weather during spring and fall
- Also works as a shell jacket on top of Jumppa Pomppa midlayer
- Waterproof and durable shell fabric protects dog from rain, wind, and dirt
- Soft and thin synthetic fur lining for efficient warmth and insulation
- Front leg slits allow complete freedom of movement
- Full protection without restriction of movement
- Light materials pack up small and are easy to carry along
- Simple yet unique design is easy to put on
- Collar has a convenient leash hole
- All materials are machine-washable
For a comparison of the different types of Pomppa coats and what they are designed for, please read "Choosing the Right Coat."
What size coat does your dog need? Click on the Sizing tab for instructions on how to measure your dog and choose the appropriate size.
How to Measure Your Dog
The size of Pomppa coats correspond directly to the dog's back length in centimeters. However, depending on the dog's proportions, the thickness of the dog's fur, or the intended use of the product, the correct size may be a size larger or smaller than what the back length indicates. If you are uncertain of sizing, please call or email us for assistance.
Notes: The sizing for the Kevyt Pomppa is the same as for the Perus and Sade Pomppa, but it is different than the sizing for the Jumppa Pomppa or Toppa Pomppa coats.
1. Back Length - Be sure that your dog is standing squarely, with head up, and is looking straight ahead. Following the contour of the dog's back closely, measure from the dog's neck at the point where it joins his shoulders to the base of his tail (the point where the tail joins the body).
2. Not used for Kevyt Pomppa
3. Chest - The circumference of the chest is measured at the widest point of the dog’s chest.
4. Waist - The circumference of the waist is measured behind the chest from the narrowest point of the dog.
| Size | Back Length | Chest | Waist |
| 25 cm | 9" to 10.24" (23-26 cm) |
9.84" to 14.96" (25-38 cm) |
14.56" to 14.96" (31-38 cm) |
| 28 cm | 10.63" to 11.42" (27-29 cm) |
11" to 16.92" (28-43 cm) |
13.38" to 16.92" (34-43 cm) |
| 31 cm | 11.81" to 12.59" (30-32 cm) |
12.20" to 18.89" (31-48 cm) |
14.56" to 18.89" (37-48 cm) |
| 34 cm | 13" to 13.77" (33-35 cm) |
13.77" to 20.86" (35-53 cm) |
15.75" to 20.86" (40-53 cm) |
| 37 cm | 14.17" to 14.96" (36-38 cm) |
14.96" to 22.83" (38-58 cm) |
16.92" to 22.83" (43-58 cm) |
| 40 cm | 15.35" to 16.14" (39-41 cm) |
15.75" to 24.80" (40-63 cm) |
18.11" to 24.80" (46-63 cm) |
| 44 cm | 16.53" to 17.71" (42-45 cm) |
16.92" to 26.77" (43-68 cm) |
19.29" to 26.77" (49-68 cm) |
| 48 cm | 18.11" to 19.29" (46-49 cm) |
18.11" to 29.13" (46-74 cm) |
20.47" to 29.13" (52-74 cm) |
| 52 cm | 19.68" to 20.86" (50-53 cm) |
18.90" to 31.50" (48-80 cm) |
21.25" to 31.50" (54-80 cm) |
| 56 cm | 21.2557" to 22.24" (54-57 cm) |
20.07" to 33.85" (51-86 cm) |
22.04" to 33.85" (56-86 cm) |
| 60 cm | 22.83" to 25" (58-61 cm) |
22" to 37.40" (53-92 cm) |
24.40" to 36.22" (58-90 cm) |
| 65 cm | 25.59" to 24.01" (62-66 cm) |
22.04" to 38.58" (56-98 cm) |
25" to 38.58" (61-93 cm) |
Materials
- Shell fabric: 100% recycled polyester
- Shell fabric water resistance: 5 000 mm
- Shell fabric has water-repellent treatment
- Lining: 100% polyester
Machine Wash
Close the belt buckle on the coat. The manufacturer also recommends using a washing bag that protects the coat from wear.
Wash with similar colors or other Pomppa coats.
Choose a 86°F (30°C) delicate cycle and a spin speed of no more than 400 rpm.
Use of a mild liquid detergent is recommended because it washes off more easily than powdered soap.
Neutralize any possible odors using vinegar or unscented laundry vinegar with a dosage of 1/2 to 1 tbsp. per coat. The vinegar should be added into the fabric softener compartment.
Do NOT use fabric softener or bleach.
Do NOT tumble dry. Let the coat dry by either hanging it or leaving it on a drying rack.
After each wash, reactivate the coat’s water-repellency.
After a few washes, restore the DWR with waterproofing spray.
Reactivating the Water Repellency
The shell fabric of Pomppa coats is finished with a DWR treatment, which keeps the fabric water-repellent. After each wash, the DWR treatment must be reactivated by heating the product evenly using one the following methods:
Tumble dry at 86°F for 3-5 minutes
Use the low heat setting on a hairdryer for 3-5 minutes from a distance of 8"
Hang in sunlight for 15 minutes (the fabric surface must reach 86°F)
Note: Too much heat can damage the coat’s waterproofness for good, so please follow the instructions carefully.
Re-treating the Water Repellency
The DWR treatment also wears off over time and after multiple washes. The product should be re-treated after water droplets no longer bead on the surface despite of the heat treatment, but they get absorded in the fabric instead. The water-repellency is easily restored using a waterproofing spray-on and following the instructions on the product page.
Note that water-repellency does not affect the fabric's water resistance. If the fabric gets saturated with water, the coat is still waterproof, but only the moisture doesn’t evaporate through the fabric as effectively anymore.
Related Products
